How to maintain roller crusher properly?
Source:www.greatwallcrushers.com Author:GreatWallPosted:2015-06-01 Views:
In the progress of producing, wear is inevitable. Knowing how to maintain Roll crusher can reduce cost and expedite production. The following is about practical maintenance ways.
1. Machine operator must have operating experience and adhere to do the "Three Goods" (good use, good manage, good repair), “Four Cans "(use, maintenance, check, clear troubles), Four Nos"(no fouling, no debris, no oil spot, no loose), so that timely maintenance can maintain the normal operation of the equipment and conduct excellent performance;
2. To avoid the entry of non-broken (hard piece of metal) cause a damage to the machine, it is appreciated to set a iron-staff removing device on the base of the feeder;
3. Lubricating grease is widely used in a powder pollution operating site (it has good sealing function, and can prevent the powder dust from entering the bearings), the amount of the lubricating grease added to the bearing seat should be 50-70 percent of its volume, and the replacement interval of the lubricating grease is three working months.
4. Crusher used grease should be chosen based on the operation site, climate and so on. Generally it can be calcium-based, sodium or calcium-based grease;
5. Complete cleanness, inspection, maintenance, as well as lubrication to the lubricating parts are necessary before restarting the machine after its long time off work.
Any questions, even about failure, troubleshooting and maintenance, CONTRACT US, it is a pleasure to help you.
Other relevant words: jaw crusher, cone crusher, Raymond mill, Diesel engine crusher