We should use the jaw crusher correctly
Source:Great Wall Heavy Industry Author:GreatWallPosted:2014-07-01 Views:
Jaw crusher, also known as jaw breaker, is a kind of earlier crushing equipment and is widely used in metallurgy, chemical industry, building materials, electricity, transportation and other industries for the advantages of simple structure, sturdy and reliable work, easy to maintenance and installation, and low cost in the construction and production.In order to improve the working efficiency and prolong the service life of jaw crusher, we should pay attention to the jaw crusher daily maintenance and use the jaw crusher correctly .
The maintenance and use
1. Assuring that the operation of machine is normal before you starting feeding.
2. The materials to be crushed should be evenly added to the crusher cavity, avoiding side feeding and preventing the load mutation and sudden unilateral increase.
3. In normal case, the bearing temperature rise should not exceed 35 degree; the maximum temperature must not exceed 70 degree. If exceeding 70 degree, you should immediately stop until you identify reasons and eliminate them.
4. You should first stop feeding before stopping, and then turn off the motor until the crushed materials are completely discharged.
5. When use, if the machine stops which is caused by the materials obstruction in the crushing cavity, you should immediately turn off the motor and eliminate the clogged material before restarting.
The maintenance and use
1. Assuring that the operation of machine is normal before you starting feeding.
2. The materials to be crushed should be evenly added to the crusher cavity, avoiding side feeding and preventing the load mutation and sudden unilateral increase.
3. In normal case, the bearing temperature rise should not exceed 35 degree; the maximum temperature must not exceed 70 degree. If exceeding 70 degree, you should immediately stop until you identify reasons and eliminate them.
4. You should first stop feeding before stopping, and then turn off the motor until the crushed materials are completely discharged.
5. When use, if the machine stops which is caused by the materials obstruction in the crushing cavity, you should immediately turn off the motor and eliminate the clogged material before restarting.